The following points should be paid attention to when installing the torque sensor: 1. The matching of the coupling 2. The guarantee of the coaxiality 3. Ensure that the mechanical installation is free from external force 4. Ensure that the shaft and the shell at both ends do not constitute a three-point force

Torque sensor installation mainly pay attention to the following points:

1. Coupling matching

2. Guarantee of coaxiality

3. Ensure that the mechanical installation is free from external force

4. Make sure that the shaft and housing at both ends do not constitute a three-point force

For the German NCTE dynamic torque sensor, which has no base and does not need to be rigidly fixed, the above problems are basically not considered; our NCTE sensor does not have a bearing seat, and only needs to use an elastic bracket to stabilize the housing and outlet slightly during installation. The position of the interface prevents the sensor from rotating due to the friction between the shaft and the housing (the housing will rotate with the shaft during rotation), and the wiring can be wound.

Disclaimer: This article is reproduced for the purpose of conveying more information. If there is an error in the source labeling or infringement of your legal rights, please contact us, we will correct and delete it in time, thank you.