Contact Fax
0552-4070672
PRODUCTS
2.Characteristics
, 4 ~ 20 ma output current superposition of HART protocol digital communications (two wire system);
, the digital compensation and nonlinear correction technology; - 10 ℃ ~ 80 ℃ digital wide temperature compensation;
With local and remote zero and span adjustment function;
On spot keystrokes, and convenient configuration;
Protection grade IP65.
表1. SM39-DH01P型HART协议智能压力变送器性能指标
unit |
KPa |
MPa |
|||||||||||
Measuring range |
0-70 |
0-100 |
0-200 |
0-350 |
0-700 |
0-1.0 |
0-2.0 |
0-3.5 |
0-7.0 |
0-10 |
0-20 |
0-35 |
0-70 |
Upper limit |
70 |
100 |
200 |
350 |
700 |
1.0 |
2.0 |
3.5 |
7.0 |
10 |
20 |
35 |
70 |
More than |
100 |
150 |
300 |
500 |
1000 |
1.5 |
3.0 |
5.0 |
10 |
15 |
30 |
52 |
100 |
Fine degrees: plus or minus 0.1% FS (typical), plus or minus 0.25% FS (maximum)
Zero temperature error: plus or minus 0.25% or less FS (full working temperature range)
Full temperature error: plus or minus 0.25% or less FS (full working temperature range)
Long term stability: plus or minus 0.25% FS/year or less
Compensation temperature: - 10 ℃ ~ 80 ℃
Working temperature: - 20 ℃ ~ 80 ℃
Storage temperature: - 40 ℃ ~ 85 ℃
______________________________________________________________________________________
For electricity: (15 ~ 30 VDC)
Digital output (4 ~ 20) superposition of mADC output digital communications HART protocol
Show: LCD display, two/three key control
Resistance: (0 ~ 32) s
Load capacity: (U - 12 v) / 0.02 Ω
Unique edge: 100 m Ω / 50 v
Explosion-proof qualified number: explosion-proof number: CE18.1519 explosion-proof marks: EXd IIC T6 Gb
______________________________________________________________________________________
Vibration dynamic: 20 g, (20 ~ 5000 Hz)
Costs: 20 g, 11 ms
Membrane sheet: stainless steel 316 l/tantalum
Pressure interface: 1 cr18ni9ti stainless steel/C hartz alloy
O ring: fluorine rubber
Weight: 1.7 kg
______________________________________________________________________________________
As shown in figure 1. SM39 shape - DH01P HART protocol of intelligent pressure transmitter is shown (unit: mm)
6. Directions for use
6.1. All the sensors through digital calibration, between different sensors have the complete consistency and interchangeability.
6.2. In transit, all of the sensor cell is in the off state, install the pressure sensor at the scene, need to unscrew the back cover, the board twist switch to "on" state, liquid crystal display normally, said the battery access is successful, the sensor power supply and signal wiring terminal access to three core on the left side 1 + (red), 2 - (black), packed and screw down the back cover. Attention should be paid to tighten sheath to prevent leakage.
6.3. Pipe installed on the pressure sensor, the sensor installation location of the closed type needle valve valve; Then use ribbons wrapped around the sensor on the nipple; Screwing in sensor in the pipe joint; Open the needle valve valve to confirm no leakage phenomenon, can complete the installation.
Related Applications
Contact Fax: 0552-4070672
Website: www.sunmoon-china.com
Mailbox: sales@sunmoon-china.com
Add: Sun Moon Science and Technology Park, No. 985, Xingzhong Road, High-tech Zone, Bengbu, Anhui, China
About Us
Company Profile
Corporate History
Honor
Company Culture
Photo Gallery
Products
Force measurement and load cell
Wireless digital sensor
Temperature and pressure sensor
Angle, displacement, speed sensor
Oilfield measurement and control systemWeighing control system
Solution
Weighing logistics network solutions
Construction machinery sensor solutions
Oil and gas IoT solutions
Follow Us
Copyright © 2020 Bengbu Riyue Instrument Research Institute Co., Ltd. 皖ICP备19017385号-1 Powered by: www.300.cn