Language
Service and Technology
Service and Technology
How to install and use a torque sensor?
Category:
Relevant sensor technology papers
Publish Time:
2020-07-08
The following points should be noted during torque sensor installation: 1. Coupling matching 2. Ensuring coaxiality 3. Ensuring that the mechanical installation is not subject to external forces 4. Ensuring that the shafts and housing at both ends do not constitute a three-point force
The following points should be noted during torque sensor installation:
1. Coupling matching
2. Ensuring coaxiality
3. Ensuring that the mechanical installation is not subject to external forces
4. Ensuring that the shafts and housing at both ends do not constitute a three-point force
For the German NCTE dynamic torque sensor, which does not have a base and whose housing does not need to be rigidly fixed, the above issues basically do not need to be considered too much; our NCTE sensor has no bearing seat, and during installation, only an elastic bracket needs to be used to slightly stabilize the position of the housing and the cable outlet to prevent the sensor from rotating due to the friction between the shaft and the housing (when rotating, the housing will have a certain rotational tendency with the shaft), causing the wiring to be entangled.
Declaration: This article is reproduced for the purpose of disseminating more information. If there are any errors in the source annotation or infringement of your legitimate rights and interests, please contact us, and we will correct and delete it in time, thank you. The above content and views are irrelevant to this company and website!
Keywords:
Return
日月仪器
Contact Fax:0552-4070672
Company Website:www.sunmoon-china.com
Email:smsales@163.com
Address: No. 985, Xingzhong Road, High-tech Zone, Bengbu City, Anhui Province, China, Sun Moon Science and Technology Park
Made in China
