Language
Products
PRODUCT CENTER
SM-P23F-15t
The SM-P23F shaft sensor features a compact structure and simple geometry, with strong torsional and bending resistance, stable and reliable performance, and easy installation; it is widely used in port and wharf cargo measurement, as well as safety detection of opening and closing machines and lifting equipment, and an optional built-in 4-20mA amplifier is available.
Overview
The SM-P23F shaft pin sensor features a compact structure, simple geometry, strong torsion and bending resistance, stable and reliable performance, and easy installation; it is widely used in port and dock cargo measurement, as well as safety detection of opening and closing machines and lifting equipment. A built-in 4-20mA amplifier is optional.
Features
Simple structure.
Strong anti-overload capacity.
High measurement accuracy, stable and reliable performance.
Dimensions (In mm. 1mm=0.03937 inches)
Circuit Diagram:
|
Red: |
+input |
Red: |
+Excitation |
|
Blue: |
-input |
Blue: |
-Excitation |
|
White: |
+output |
White: |
+Signal |
|
Yellow: |
-output |
Yellow: |
-Signal |
Specification:
|
Item Type |
Technical parameters |
|
|
Measurement Range |
0～15t |
|
|
Operating Voltage |
10~12 VDC |
|
|
Current Consumption |
<100 mA |
|
|
Dual Signal Output |
Analog Output |
1.0±0.015mV/V |
|
Analog Output |
4～20mA/24VDC |
|
|
Digital Bus |
CAN open, |
|
|
Overall Accuracy |
0.5%F.S |
|
|
Temperature Drift |
0.5%F.S/10℃ |
|
|
Operating Temperature |
-40～+85℃ |
|
|
Safe Overload |
200% F.S |
|
|
Yielding Safety Margin |
300% F.S |
|
|
Breakage Safety Margin |
500% F.S |
|
|
Material |
High-performance alloy steel or (chromium ratio > 15% stainless steel) |
|
|
Protection Level |
IP67 (IEC60529) |
|
|
Climate Test |
EN60068-2-30, DB55℃ |
|
|
Vibration Resistance |
EN60068-2-6, 5-500Hz, 50g, 10mm |
|
|
Shock Resistance |
EN60068-2-27 (half sine) |
|
|
Coding |
Range |
|
110123CWT15t |
15t |
Keywords: Shaft pin sensor, force value detection, safety limit
Measurement Principle
The shaft pin sensor utilizes the elastic deformation of the elastomer under external force, causing the resistance value of the strain gauge attached to its surface to change (increase or decrease). Then, through the corresponding measurement circuit, this resistance change is converted into an electrical signal (voltage or current), thus completing the force measurement process.
Detailed Introduction
Keywords:
Previous
Next
Related Applications
undefined
日月仪器
Contact Fax:0552-4070672
Company Website:www.sunmoon-china.com
Email:smsales@163.com
Address: No. 985, Xingzhong Road, High-tech Zone, Bengbu City, Anhui Province, China, Sun Moon Science and Technology Park
Made in China
