Products
PRODUCT CENTER
SM40F side pressure sensor
Category:
Description Overview
This sensor uses alloy steel or stainless steel material, and has a unique side-pressure structure. The working principle is The wire rope passes through a U-bolt (or pressure block + bolt) and is fixed to the sensor by two end slots. When the wire rope is under tension, the force acts on the sensor through the guide wheel. Suitable for the measurement and control of wire rope tension, mainly used in electric hoists, material lifts 、 and other lifting equipment such as wire rope direct lifting. 。
Features : High reliability, good interchangeability, easy installation and use, simple operation , Easy Maintenance
Dimensions Dimensions ( In mm. 1mm=0.03937 inches )


Circuit Diagram Circuit Diagram:

Specification Technical Parameters:
|
Item Type |
Technical Parameters Technical parameters |
|
Measuring Range |
1 ~ 10t |
|
Operating Voltage |
10~12 VDC |
|
Zero Balance Zero balance |
1.0 ± % of rated output |
|
Analog Output |
2.0±0.0 1mV/V |
|
Input Impedance Input resistance(Rlc) |
400 ± 20 Ω ( ohms ) |
|
Output Impedance Output resistance(Ro) |
350 ± 5 Ω ( ohms ) |
|
Insulation Resistance Insulation resistance |
≥ 5000 M Ω( Mege-Ohms ) |
|
Overall Accuracy |
0.05 %FS |
|
Temperature Drift |
0.02 %FS/10℃ |
|
Operating Temperature |
-40 ~ +85℃ |
|
Safe Overload |
200% FS |
|
Yield Safety Margin |
300% FS |
|
Breakage Safety Margin |
500% FS |
|
Material |
High-performance alloy steel or (chromium content > 15% stainless steel) 15%不锈钢) |
|
Protection Level |
IP67/IP68 |
Keywords:
Previous
Related Applications
undefined
Language